Toyota AVENSIS 2000 Supplement Manual page 224

2 Measure harness and connector between Engine and ECT ECU and automatic
transaxle solenoid connector.
+
SL1
SL1
SL1
Solenoid Connector
+
SL2
SL2
SL2
Solenoid Connector
S4
Solenoid Connector
OK
AVENSIS/CORONA SUP (RM781E)
DIAGNOSTICS
–
+
SL1
–
+
–
SL2
–
S4
D10030
– AUTOMATIC TRANSAXLE (U240E)
PREPARATION:
(a) Disconnect the solenoid connector from the automatic
transaxle.
(b) Disconnect the connector from the Engine and ECT ECU.
CHECK:
(a) Measure the harness and connector between terminal
+ –
SL1 or SL1 of Engine and ECT ECU and terminal SL1
–
or SL1 of solenoid connector.
(b) Measure the harness and connector between terminal
+ –
SL2 or SL2 of Engine and ECT ECU and terminal SL2
–
or SL2 of solenoid connector.
(c) Measure the harness and connector between terminal S4
of Engine and ECT ECU and terminal S4 of solenoid con-
nector.
OK:
Resistance: 0 Ω
NG Repair or replace the harness or connector.
DI–93
+
+