Toyota AVENSIS 2000 Supplement Manual page 465

MX–44
SST
AVENSIS/CORONA SUP (RM781E)
MANUAL TRANSAXLE (C50, C250)
(d)
If the preload is not within the specification, remove the trans-
mission case side outer race of the side bearing with SST.
MT0092
(See page MX–39)
Select another shim.
HINT:
The preload will change by about 0.3 – 0.4 N·m (3 – 4 kgf·cm,
2.6 – 3.5 in.·lbf) with each 0.05 mm change in shim thickness.
– DIFFERENTIAL CASE
Using SST and a torque wrench, measure the preload.
SST 09564–32011
Preload (at starting):
New bearing
0.8 – 1.6 N·m (8 – 16 kgf·cm, 6.9 – 13.9 in.·lbf)
Reused bearing
0.5 – 1.0 N·m (5 – 10 kgf·cm, 4.3 – 8.7 in.·lbf)
Mark Thickness mm (in.)
A 2.10 (0.0827)
B 2.15 (0.0846)
C 2.20 (0.0866)
D 2.25 (0.0886)
E 2.30 (0.0906)
F 2.35 (0.0925)
G 2.40 (0.0945)
H 2.45 (0.0965)
J 2.50 (0.0984)
K 2.55 (0.1004)
Mark Thickness mm (in.)
L 2.60 (0.1024)
M 2.65 (0.1043)
N 2.70 (0.1063)
P 2.75 (0.1083)
Q 2.80 (0.1102)
R 2.85 (0.1122)
S 2.90 (0.1142)
T 2.95 (0.1161)
U 3.00 (0.1181)
– –