Toyota AVENSIS 2000 Supplement Manual page 535

MX–18
REASSEMBLY
Reassembly is in the reverse order of disassembly (See page MX–10).
HINT:
Coat all of the sliding and rotating surfaces with gear oil before assembly.
NOTICE:
When working with FIPG material, you must observe the following items.
S
Using a razor blade and gasket scraper, remove all the old FIPG material from the gasket sur-
faces.
S
Thoroughly clean all components to remove all the loose material.
S
Clean both sealing surfaces with a non–residue solvent.
S
Apply FIPG in an approx. 1 mm (0.04 in.) wide bead along the sealing surface.
S
Parts must be assembled within 10 minutes of application. Otherwise, the FIPG material must
be removed and reapplied.
AVENSIS/CORONA SUP (RM781E)
MANUAL TRANSAXLE (S54, S55) – MANUAL TRANSAXLE ASSEMBLY
MX037–04