CORRECT
WRONG
AVENSIS/CORONA SUP (RM781E)
STEERING
–
DRIVE BELT
INSPECTION
INSPECT DRIVE BELT
Visually check the drive belt for excessive wear, frayed cords,
etc.
If any defect has been found, replace the drive belt.
HINT:
S
Cracks on the rib side of a belt are considered acceptable.
P06717
If the missing chunks from the ribs are found on the drive
belt, it should be replaced.
S
After installing a drive belt, check that it fits properly in the
ribbed grooves.
S
Check with your hand to confirm that the drive belt has not
slipped out of the groove on the bottom of the pulley.
WRONG
F01336
DRIVE BELT
SR–1
SR08H–06