MX–4
(a)
AVENSIS/CORONA SUP (RM781E)
MANUAL TRANSAXLE (E351)
REMOVAL
1.
REMOVE BATTERY AND TRAY
2.
REMOVE AIR CLEANER CASE ASSEMBLY WITH AIR
HOSE
3.
REMOVE LH AND RH ENGINE UNDER COVERS
4.
REMOVE NO.1 AIR TUBE ASSEMBLY
(a)
Disconnect the No.2 vacuum hose from the E–VRV for
EGR.
(b)
Disconnect the No.2 vacuum hose from the VSV for EGR.
(c)
Disconnect the VSV connector for EGR.
(d)
Disconnect the turbo pressure sensor connector and vac-
uum hose.
(b)
D06626
(e)
Remove the 2 bolts as shown in the illustration.
Torque: 25 N·m (255 kgf·cm, 18 ft·lbf)
(f)
Disconnect the 2 hose clips, and remove the No.1 air tube
assembly.
5.
REMOVE DIESEL THROTTLE BODY WITH NO.2 AIR
TUBE ASSEMBLY
(a)
Disconnect the intake air temperature sensor connector.
(b)
Disconnect the throttle control motor connector.
(c)
Disconnect the full opener switch connector.
D06627
(d)
Remove the 3 bolts from the diesel throttle body.
Torque: 21 N·m (214 kgf·cm, 15 ft·lbf)
(e)
Remove the 2 bolts as shown in the illustration.
Torque: 25 N·m (255 kgf·cm, 18 ft·lbf)
(f)
Disconnect the 2 hose clips, and remove the diesel
throttle body assembly with the No.2 air tube assembly.
D06628
–
MANUAL TRANSAXLE UNIT
MX097–03