Toyota AVENSIS 2000 Supplement Manual page 204

AVENSIS/CORONA SUP (RM781E)
DIAGNOSTICS – AUTOMATIC TRANSAXLE (U240E)
9. MANUAL SHIFTING TEST
HINT:
By this test, it can be determined whether the trouble is within
the electrical circuit or is a mechanical problem in the transaxle.
(a) Disconnect the solenoid wire.
(b) Inspect the manual driving operation.
Check that the shift and gear positions correspond to the
table below.
While driving, shift through the L, 2 and D ranges.
D09299
Check that the gear change corresponds to the shift
range.
Shift range
HINT:
If the L, 2 and D range gear positions are difficult to distinguish,
do the above read test.
If any abnormality is found in the above test, the problem is in
the transaxle itself.
(c) Connect the solenoid wire.
(d) Cancel out the DTC.
D
2
L
R
P
DI–73
Gear position
O/D
O/D
1st
Reverse
Pawl Lock