Toyota AVENSIS 2000 Supplement Manual page 697

BE–6
UNLOCK
LOCK
UNLOCK
LOCK
3 2
UNLOCK
UNLOCK
AVENSIS/CORONA SUP (RM781E)
BODY ELECTRICAL
INSPECTION
1.
If continuity is not as specified, replace the switch.
I19362
2.
OFF (Door Lock set to
ON (Door Lock set to
If continuity is not as specified, replace the switch.
I19362
3.
(a)
UNLOCK
(b)
LOCK
If operation is not as specified, replace the door lock assembly.
3 2
LOCK
I19363
4.
2
(a)
(b)
I19364
– POWER DOOR LOCK CONTROL SYSTEM
w/ Double locking system:
INSPECT DOOR KEY LOCK SWITCH CONTINUITY
Switch position Tester connection
LOCK
OFF
w/ Double locking system:
INSPECT DOOR UNLOCK DETECTION SWITCH CON-
TINUITY
Switch position Tester connection
LOCK)
UNLOCK)
w/ Double locking system:
INSPECT DRIVER'S DOOR LOCK MOTOR OPERA-
TION
Connect the positive (+) lead from the battery to terminal
3 and the negative (–) lead to terminal 2, and check that
the door lock link moves to UNLOCK position.
Reverse the polarity and check that the door lock link
moves to LOCK position.
w/ Double locking system:
INSPECT DRIVER'S DOOR PTC THERMISTOR OP-
ERATION
Connect the negative (–) lead from the battery to terminal
2.
Connect the negative (–) lead from the ammeter to termi-
nal 3 and the positive (+) lead to battery positive (+) termi-
nal, and check that the current changes from approxi-
mately 3.2 A to less than 0.5 A within 20 to 70 seconds.
Specified condition
5 – 10 Continuity
– No continuity
Specified condition
– No continuity
6 – 1 Continuity
BE1XP–01