CL–10
AVENSIS/CORONA SUP (RM781E)
CLUTCH
REMOVAL
1.
2.
(a)
(b)
(c)
NOTICE:
Do not drop the clutch disc.
Matchmarks
D00202
3.
Remove the release bearing with the fork together and then
separate them.
Q01056
–
CLUTCH UNIT
REMOVE TRANSAXLE FROM ENGINE
C50, C250 M/T: See page MX–2
S54, S55 M/T: See page MX–2
E351 M/T: See page MX–2
REMOVE CLUTCH COVER AND DISC
Place matchmarks on the flywheel and clutch cover.
Loosen each set bolt one turn at a time until spring tension
is released.
Remove the set bolts, and pull off the clutch cover with the
clutch disc.
REMOVE RELEASE BEARING AND FORK FROM
TRANSAXLE
CL01K–04