Toyota AVENSIS 2000 Supplement Manual page 570

AUTOMATIC TRANSAXLE (A246E)
5 (IG)
4 (KLS+)
3 (E)
2 (STP)
Wire harness side
Terminal
1 – 3 (ACC – E) Ignition switch ACC
5 – 3 (IG – E) Ignition switch ON
2 – 3 (STP – E) Depressing brake pedal
(1) Ignition switch ACC and P range
+
4 – 3 (KLS – E) (2) Ignition switch ACC and except P range
(3) Ignition switch ACC and except P range (After approx. 1 second)
Terminal
2 – 3 (ACC – E) Ignition switch ACC
4 – 3 (IG – E) Ignition switch ON
5 – 3 (STP – E) Depressing brake pedal
(1) Ignition switch ACC and P range
+
1 – 3 (KLS – E) (2) Ignition switch ACC and except P range
(3) Ignition switch ACC and except P range (After approx. 1 second)
AVENSIS/CORONA SUP (RM781E)
–
INSPECTION
1 (ACC)
1. LHD:
INSPECT SHIFT LOCK CONTROL COMPUTER
Using a voltmeter, measure the voltage at each terminal.
HINT:
Do not disconnect the shift lock control computer connector.
D00758
Measuring Condition
2. RHD:
INSPECT SHIFT LOCK CONTROL COMPUTER
Using a voltmeter, measure the voltage at each terminal.
HINT:
Do not disconnect the shift control computer connector.
D05910
Measuring Condition
SHIFT LOCK SYSTEM
AX–9
AX10S–01
Voltage (V)
10 – 14
10 – 14
10 – 14
0
7.5 – 11
6 – 9.5
Voltage (V)
10 – 14
10 – 14
10 – 14
0
7.5 – 11
6 – 9.5