Toyota AVENSIS 2000 Supplement Manual page 540

A B C
AVENSIS/CORONA SUP (RM781E)
MANUAL TRANSAXLE (S54, S55)
3.
(a)
(b)
D
SM0182
If the outer diameter is less than the minimum, replace the input
shaft.
(c)
If the runout exceeds the maximum, replace the input shaft.
CM0013
– INPUT SHAFT
INSPECT INPUT SHAFT
Check the input shaft for wear or damage.
Using a micrometer, measure the outer diameter of the in-
put shaft journal surface.
Minimum outer diameter:
Part A: 26.987 mm (1.0625 in.)
Part B: 32.484 mm (1.2789 in.)
Part C: 33.100 mm (1.3031 in.)
Part D: 29.987 mm (1.1806 in.)
Using a dial indicator, check the shaft runout.
Maximum runout: 0.03 mm (0.0012 in.)
MX–23