DI–44
INSPECTION PROCEDURE
1
Check SLT solenoid valve.
(+)
(–)
D01888
D01889
D01887
OK
2
Check harness and connector between SLT solenoid valve and Engine and ECT
ECU (See page IN–30).
OK
Check and replace Engine and ECT ECU (See
page IN–30).
AVENSIS/CORONA SUP (RM781E)
DIAGNOSTICS
2
1
1
2
D02235
–
AUTOMATIC TRANSAXLE (A246E)
PREPARATION:
(a)
Jack up the vehicle.
(b)
Remove the oil pan.
(c)
Disconnect the solenoid connector.
Check solenoid resistance:
CHECK:
Measure resistance between terminals 1 and 2 of solenoid con-
nector.
OK:
Resistance: 5.0 – 5.6 Ω at 20 °C (68°F)
Check solenoid operation:
CHECK:
Connect positive (+) lead with an 8 ∼ 10 W bulb to terminal 1 of
solenoid connector and negative (–) lead to terminal 2, then
check the movement of the valve.
OK:
When battery voltage is applied.
When battery voltage is cut off.
NG
Replace SLT solenoid valve.
NG
Repair or replace harness or connector.
Valve moves in
in the illustration.
Valve moves in
in the illustration.
direction
direction