: Apply MP Grease
Correct
AVENSIS/CORONA SUP (RM781E)
AUTOMATIC TRANSAXLE (U240E)
REASSEMBLY
1.
2.
3.
(a)
(b)
F00686
(c)
F00684
(d)
Wrong
NOTICE:
F00688
(e)
F00689
–
FLOOR SHIFT ASSEMBLY (LHD)
INSTALL COLLARS
INSTALL SHIFT LEVER KNOB SLEEVE TO DETENT
ROD
ASSEMBLE SHIFT LEVER SUB–ASSEMBLY
Apply MP grease on the compression spring, the detent
rod and the shift lever sub–assembly.
Install the spring and the detent rod to shift lever sub–as-
sembly.
Place the shift lever sub–assembly as shown in the il-
lustration.
Insert the grooved pin in the detent rod pin hole.
S
Assemble the grooved pin to ensure that it fits into the
guide hole of the shift lever sub–assembly in parallel.
S
Take care not to insert the pin in the wrong direction
of the detent rod.
Meet the grooved pin with the notch of the guide hole.
AX–21
AX0C6–04