Toyota AVENSIS 2000 Supplement Manual page 489

Hide thumbs Also See for AVENSIS 2000:

Table of Contents

AVENSIS/CORONA SUP (RM781E)

MANUAL TRANSAXLE (E351)

Socket Wrench

MANUAL TRANSAXLE ASSEMBLY

Using SST and a socket wrench, remove the output shaft

front bearing.

09950–00020, 09950–00030

Using SST and a press, install a new output shaft front

09316–60011 (09316–00071)

IF NECESSARY, REPLACE REVERSE RESTRICT PIN

Using a hexagon wrench (6 mm), remove the screw plug.

Using a pin punch and hammer, drive out the slotted

Replace the reverse restrict pin.

Using a pin punch and hammer, drive in the slotted spring

Apply sealant to the screw plug threads.

Part No. 08833–00080, THREE BOND 1344, LOCTITE

242 or equivalent

Using a hexagon wrench (6 mm), install and torque the

Torque: 13 N·m (130 kgf·cm, 9 ft·lbf)

Show Quick Links

Chapters

Table of Contents