Toyota AVENSIS 2000 Supplement Manual page 439

MX–18
AVENSIS/CORONA SUP (RM781E)
MANUAL TRANSAXLE (C50, C250)
(d)
D03038
(e)
(f)
(g)
(h)
27.
28.
Z00674
NOTICE:
At the time of reassembly, please refer to the following
item.
Before reassembly, inspect the differential tapered roller
bearing preload. (See page MX–42)
29.
30.
(a)
NOTICE:
At the time of reassembly, please refer to the following
item.
Position the shifting key springs so that their end gaps are
not aligned.
(b)
– MANUAL TRANSAXLE ASSEMBLY
Remove the No. 1 gear shift head.
Using a magnetic finger, remove the 2 balls from the re-
verse shift fork.
Remove the No. 3 gear shift fork shaft and reverse shift
fork.
Pull out the No. 1 gear shift fork shaft.
Remove the No. 1 and No. 2 gear shift forks.
REMOVE INPUT AND OUTPUT SHAFTS TOGETHER
FROM TRANSAXLE CASE
REMOVE DIFFERENTIAL CASE ASSEMBLY
REMOVE MAGNET FROM TRANSAXLE CASE
DISASSEMBLE NO. 3 CLUTCH HUB ASSEMBLY
Using a screwdriver, remove the shifting key spring.
Remove the 3 No. 3 shifting keys from the No. 3 clutch
hub.