Toyota AVENSIS 2000 Supplement Manual page 230

2 Check shift solenoid valve DSL.
(–) (+)
(–) (+)
D03420
D03419
D03447
D03448
OK
Check and replace or repair the solenoid
wire.
AVENSIS/CORONA SUP (RM781E)
DIAGNOSTICS
(–) (+)
D08282
– AUTOMATIC TRANSAXLE (U240E)
Electrical Check:
PREPARATION:
(a) Jack up the vehicle.
(b) Remove the oil pan.
(c) Disconnect the DSL solenoid valve connector.
(d) Remove the DSL solenoid valve.
CHECK:
(a) Measure resistance between terminal DSL of shift sole-
noid valve and solenoid body.
(b) Connect positive (+) lead to terminal of solenoid connec-
tor, negative (–) lead to solenoid body.
OK:
(a) Resistance: 11 – 15 Ω
(b) The DSL solenoid valve makes operation noise.
Mechanical Check (Except Europe Only):
PREPARATION:
(a) Remove the oil pan.
(b) Remove the DSL solenoid valve.
CHECK:
(a) Applying 490 kPa (5 kgf/cm
check that the solenoid valve does not leak air.
(b) When battery positive voltage is supplied to the shift sole-
noid valve, check that the solenoid valve opens.
OK:
(a) Solenoid valve does not leak air.
(b) Solenoid valve opens.
NG Replace the DSL solenoid valve.
2
, 71 psi) of compressed air,
DI–99