Keysight FieldFox B Series User Manual page 169

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
SA Mode Settings
"Audio Demod ON and OFF" on page 171
"Setting the Marker Counter Precision Softkey" on
page 171
"Setting the Mkr->TuneFreq Softkey" on page 171
How to select Tune & Listen
— Press Measure 1 >
— Then choose a demodulation type. Select a setting based on the type of
See also,
TnL AM SSB Gain
When you select AM USB or AM LSB softkeys, the TnL AM SSB Gain softkey
becomes active.
— Press Meas Setup 4 >
—
Keysight N9938-90006 User's Guide
Analog Demod Tune & Listen
interfering signal you suspect is being broadcast.
Press Meas Setup 4 >
— AM – Sets AM (Double-sideband with carrier) as the modulation
type.
— FM Narrow – Sets Frequency Modulation; Narrow bandwidth.
Choose when interfering transmission consist of voice or data.
— FM Wide – Sets Frequency Modulation; Narrow bandwidth. Choose
when interfering transmission consist of voice or data.
— AM USB – Sets the modulation type to AM upper sideband.
Annotation: AM USB @ Center Frequency displayed at the top of
display. See also,
— AM LSB – Sets the modulation type to AM lower sideband.
Annotation: AM LSB @ Center Frequency displayed at the top of
display. See also,
"How to select Analog Demod (Metrics)" on page
TnL AM SSB Gain – sets the gain in the IF path for TnL SSB measurements
(the optimal IF path gain is automatically determined/set for regular AM
and all the other demod types, but it cannot be automatically determined
for AM SSB so it has to set it manually).
Tnl Demod Type then
"TnL AM SSB Gain".
"TnL AM SSB Gain".
More then
Tune & Listen
>
173.
169