Keysight FieldFox B Series User Manual page 235

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
How to Set Up EMF Settings (Requires EMF (Option 358), GPS (Option 307), and SA
Mode (Option 233–Mixed Analyzers))
7. Move the antenna to the correct physical location/position for your
8. Antenna corrections: Press
9. When done press <Back
10. Press Meas Setup 4 >
11. Repeat steps
12. Sum Channel Power: Press
Other softkey choices are Restart, Corrections,
Traces Blank
Editing Antenna Correction Factors and Adding New Antenna Factors
This section contains two procedures illustrating how to edit the Antenna
Factors settings table values.
If New is selected under the X, Y, or Z Antenna or Cable softkey menu,
whatever antenna or cable factors that have been imported as the default
values and are displayed in the Settings table.
1. Selecting an antenna softkey menu:
Keysight N9938-90006 User's Guide
measurement.
OFF to ON – learn more, refer to
page 162.
updated with antenna's current position channel power values and display
trace.
X axis channel power (CHANPOW) data and trace are frozen in the upper
right of the EMF Channel Power window.
through
5
After pressing the Axis Y softkey, the Axis-X Antenna softkey changes to
read Enabled (Axis-X measurement saved) and because the Y-Axis is now
the active antenna (measuring data). Axis-Y softkey behaves similarly after
it is saved and Axis-Z is pressed.
now displays the summed values of the 3 axes.
View.
Press Scale/Amptd >
softkey menus:
— X axis Antenna
triaxial antenna.
— Y axis Antenna
triaxial antenna.
— Z axis Antenna
triaxial antenna.
— Cable – to open a softkey menu to edit the cable factors for an
antenna setup.
Corrections X-Axis Antenna Off
>
"How to Use the Antenna Softkeys" on
EMF Active Save Axis Result
>
for the axis Y and Z.
10
Save Axis Result. The Live Sum CHP value
Clear Saved
More Corrections then choose one of these
>
– to open a softkey menu to edit the X axis of a
– to open a softkey menu to edit the Y axis of a
– to open a softkey menu to edit the Z axis of a
Antenna
>
– the display is
Results, and Save
235