Keysight FieldFox B Series User Manual page 707

Noise Figure Mode (Option 356)
How to Define a Noise Figure Measurement
Figure 29-24 Editing ENR Tables
About ENR (*.enr), Preamplifier (*.amp), and DUT (*.dut) Files
This section contains the following:
—
—
—
ENR (*.enr) Files
— ENR files are saved to, and recalled from, the NoiseFigure\ENR folder. If the
— ENR files are stored as *.enr files. Existing ENR files that are loaded into the
— To DELETE a *.enr file, use the Manage Files feature. Learn more in
Keysight N9938-90006 User's Guide
"ENR (*.enr) Files" on page 707
"Preamplifier (*.amp) Files" on page 708
"DUT (*.dut) Files" on page 708
folder does not already exist on a USB or SD card, it is created
automatically before storing the file.
FieldFox can be overwritten. Your edited file will NOT be overwritten when
firmware is updated.
"Manage Files" on page 813.
Uses existing ENR file format Refer
to
https://www.keysight.com/us/en/a
ssets/9018-01420/user-manuals/9
018-01420.pdf.
1. Three additional header fields
(used for uncertainty calculations)
—ENR Uncert Cov
–Γ Spec Style
–Γ Distribution
2. Auto Populate fields are not part
of the file. These fields are only
used to assist in filling the table
values.
707