Keysight FieldFox B Series User Manual page 327

Electromagnetic Interference (EMI) Measurements – Option 361
EMI Measurements Mode Settings
How to set a CISPR Band
By default, the preamp is OFF.
— Press Measure 1 >
Learn more, see
Figure 12-1 CISPR Band C Example
Keysight N9938-90006 User's Guide
probability (i.e., a fraction from 0 to 1.0) on the Y axis, vs. Power on
the X axis. Markers adapt correspondingly. Histogram and CCDF
become the Input choices per trace, replacing Detector on the Trace
menu. APD annotation is displayed on the left side when enabled.
See also, "Input – (Trace Input for APD Measurements)" on page 335
and "How to set the EMI Traces" on page
CISPR Band
— A – 9 kHz to 150 kHz
— B – 150 kHz to 30 MHz
— C – 30 MHz to 300 MHz
— D – 300 MHz to 1 GHz
— E – 1 GHz to 18 GHz
"Resolution Bandwidth (Res BW)" on page
332.
then choose:
(Default)
330.
327