Keysight FieldFox B Series User Manual page 816

File Management
Saving and Recalling Files
How to edit keywords
1. Press Save/Recall 9 >
2. Then
— Use the
— When a keyword is selected, then press Edit.
— Then choose from the following:
How to move the cursor:
— Use the rotary knob to move the cursor along the same row. The cursor will
— Use the
When the selected keyword is complete:
— Press
— Press
Prefixes and Suffixes for Filenames
The prefix and suffix (Auto Append) can be used together to organize files.
Once set and enabled, they are automatically entered as the beginning (Prefix)
and end (Suffix - using Auto Append) of a filename when performing a Save
operation. These settings are persistent, until disabled. Refer to
the Prefix and Suffix (Auto Append)" on page 817
Auto Append (Number and Date)" on page
If you are only interested in adding a prefix or a suffix to a new file or files
one time, refer to
File–Save Naming Options are settings are persistent through Preset and
power cycling (e.g., Prefix, Auto Append).
This section contains the following sections:
—
816
Next Page and Previous Page
arrows to select a keyword to edit.
— Press Select to add the cursor character to the end of the selected
keyword.
— Press Backspace
selected keyword.
— Press Shift to change from upper-case to lower-case and vice versa.
— Press Alt Keywords
change rows when it comes to a row end.
arrows to move the cursor up and down between rows.
Done to save all keywords and close the Edit Keywords labeler. These
keywords will exist on the FieldFox until changed.
Cancel to close the labeler without saving changes.
"Manage Files" on page
"How to edit the Prefix and Suffix (Auto Append)" on page
More Edit Keywords
>
to view all keywords.
to erase the last character from the end of the
to toggle through different keyword choices.
819.
813.
Keysight N9938-90006 User's Guide
"How to edit
and "How to enable/disable
817.