Keysight FieldFox B Series User Manual page 482

Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307))
How to Set Up Mapping Settings
How to Set Up Mapping Settings
IMPORTANT! See also,
This section reviews the steps in setting up an Option 352 Mapping
measurement.
This section consists of:
—
—
Figure 16-12 Overview – Setting Up Option 352 (Indoor Mapping) Using Other Modes
—
Figure 16-13 Overview – Setting Up Option 352 (Outdoor Mapping) Using Other Modes
482
"Alignments" on page
"How to Set Up Mapping When the FieldFox Is On The LAN"
"Option 352 Indoor Maps Setup Procedure"
"Option 352 Outdoor Maps Setup Procedure"
204, in SA mode.
(Requires GPS Option 307)
Keysight N9938-90006 User's Guide