Keysight FieldFox B Series User Manual page 166

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
SA Mode Settings
3. Press Scale/Amptd >
4. Press
Optional:
— Press
—
About Antenna and Cable files
— Cable files are saved and recalled from the Cables folder.
— Antenna files are saved and recalled from the Antenna folder.
— To DELETE Cable or Antenna files, use the Manage Files feature. Learn more
— If the folder does not already exist on a USB or SD card, it is created
— All Antenna and Cable files are saved and recalled as *.csv files, which
— The FieldFox can also read *.ANT (Antenna) files that were created from
166
Then choose your final measurement amplitude unit, under Scale/more. If
you selected either dB /m
should see this list of available Field Strength units
— dBµV/m == dB micro Volts per meter
— dBm/m^2 == dBm per meter squared
— V/m == volts per meter
— W/cm^2 == watts per cm squared
— W/m^2 == watts per meter squared
— dBµA/m == dB micro Amps per meter
— dBG == dB gauss
— dBpT == dB pico tesla
Back > Back > Save Antenna
the specified Storage Device. Enter a filename using the FieldFox labeler
(learn more in "How to use the FieldFox labeler " on page
about Antenna and Cable files below.
Recall Antenna
the specified Storage Device.
Storage Device Changes the device used to save or recall files. Choose
from Internal (default setting), USB (must be connected) or SD card. This is
a different setting from the Save/Recall Storage Device setting.
in "Manage Files" on page
automatically before storing the file.
allows them to also be read by spreadsheet programs.
older Keysight Spectrum Analyzers.
or dB S/m for the Antenna Factor unit, you
More Unit dBuV/m and choose from:
>
or Save Cable
or Recall Cable to load an Antenna or Cable file from
813.
Keysight N9938-90006 User's Guide
to save your changes to
807). Learn more