Keysight FieldFox B Series User Manual page 479

Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307))
Importing a .zip File to the FieldFox
Importing a .zip File to the FieldFox
For FTP, refer to Refer to
:MMEM SCPI commands in the
www.keysight.com. See also,
Is On The LAN" on page
On the FieldFox:
Press System 7 >
1. Press
2. Verify your SD card/USB Source Device is selected.
3. Press
4. In the "Select .zip file to import" window that opens, if there is
5. Press
Keysight N9938-90006 User's Guide
Utilities
Import Maps
If not then:
Press Source Device [Internal]
Import Maps (ZIP)
more than one .zip file listed, select the .zip file you want to load by using
the arrows, or the rotary knob and then press
Refer to Figure 16-11 on page 481
Back to return to the previous menu.
"Move (Copy) Files" on page 809
FieldFox Programming Guide
"How to Set Up Mapping When the FieldFox
483.
> Mapping > Map Explorer (Get Maps)
> SD Card | USB
and Figure 16-11 on page
and to the
on
Recall File.
481.
479