Keysight FieldFox B Series User Manual page 363

Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5G TF
Option 377, 5G NR / 5G NR EVM Conducted Option 378
How to Set Up Over–the–Air (OTA) Mode Settings
IMPORTANT! When multiple component carriers are selected, the results
of the component carrier (CC) with the highest power are displayed. Refer
to
8. Select a substep:
Keysight N9938-90006 User's Guide
— All (Not applicable for Spectrum. When All is specified, for
Spectrum, the FieldFox defaults to CC0) or
— CC0, CC1, CC2, CC3, or
up to eight component carrier choices (CC5, CC6, and
CC7))
Repeat process as needed for additional Windows, Data, and CC settings.
Figure 13-17 on page
a. When Display Type is set to Bar Chart or Strip Chart then for all for
all OTA Options: Press Trace 6 >
— Then Meas Data n
LTE FDD and LTE TDD: RSRP, RSRQ, RSSI, SINR, PSS, SSS
(Default = RSRP).
5G TF: PSS, SSS or Power (Default = PSS).
5G NR: RSRP, RSRQ, RSSI, SINR, PSS, SSS or DMRS
(Default = = RSRP).
5G NR EVM: RSRP, RSRQ, RSSI, PSS, SSS, PBCH, DMRS, or
Power (Default == PSS).
— Then Sort Order
Refer to "About Over–the–Air (OTA) Measurements" on
page 346. When this softkey is inactive the Sort Order is set
to Auto.
— Then Sort Data n
LTE FDD and LTE TDD: RSRP, RSRQ, RSSI, SINR, PSS, SSS,
Freq Error.
5G TF: PSS, SSS, Power, Sync Corr.
5G NR: RSRP, RSRQ, RSSI, SINR, PSS, SSS, DMRS, Freq Error,
SSB Index.
5G NR EVM: RSRP, RSRQ, RSSI, PSS, SSS, PBCH, DMRS,
Power, Sync Error, Time Offset, PSS EVM, SSS EVM, PBCH
EVM, DMRS EVM, Composite EVM.
— Then Data Logging
Data Logging (OTA Options 370, 372, 377, and 378)" on
page 401.
b. 5G NR Only:
CC4
373.
More
– Then select the data type:
and choose Up
– Then select the type of data to be sorted:
– to record data. Refer to
(i.e., 5G TF and 5G NR have
or Down (Default == Auto).
"How to Use
363