Keysight FieldFox B Series User Manual page 37

Preparing for Initial Use of Your New FieldFox
Avoid Overpowering the FieldFox
Maximum Input Voltages and Power:
RF Output Connector: 50V DC, +23 dBm RF
Ext Trig/Ref Connector: 5.5 V DC
RF Input:
DC Input: 19VDC, 4ADC, 60 Watts maximum when charging battery
Learn more about Maximum power and voltages in the FieldFox Data
Sheet. Refer to
https://www.keysight.com/us/en/assets/7018-06516/data-sheets/5992-
3702.pdf.
Very often, coaxial cables and antennas build up a static charge, which, if
allowed to discharge by connecting to the FieldFox, may damage the
instrument input circuitry. To avoid such damage, it is recommended to
dissipate any static charges by temporarily attaching a short to the cable
or antenna prior to attaching to the FieldFox.
Keysight N9938-90006 User's Guide
+27 dBm RF, ±50 VDC Max. (N991xA/B, N9925B, N9926A,
N9928A, N993xA/B)
+23 dBm RF, ±50 VDC Max. (N9923A, N9923AN)
+25 dBm RF, ±40 VDC Max. (N995xA/B, N996xA/B)
37