Keysight FieldFox B Series User Manual page 853

Safety Considerations
Certification and Compliance Statements
Certification and Compliance Statements
Certification
Keysight Technologies, Inc. certifies that this product met its published
specifications at the time of shipment from the factory. Keysight Technologies,
Inc. further certifies that its calibration measurements are traceable to the
United States National Institute of Standards and Technology, to the extent
allowed by the Institute's calibration facility, and to the calibration facilities of
other International Standards Organization members.
Keysight N9938-90006 User's Guide
This symbol marks the standby position of the power line switch.
This symbol marks the ON position of the power line switch.
This symbol marks the OFF position of the power line switch.
This symbol indicates the input power required is AC.
This symbol indicates DC voltage.
This symbol indicates a three-phase alternating current.
This symbol indicates frame or chassis terminal.
This symbol indicates the presence of a laser device.
This symbol identifies the Protective Conductor Terminal.
This symbol indicates the equipment is protected throughout by double or
reinforced insulation.
853