Keysight FieldFox B Series User Manual page 427

5G Rapid Prototype Phased Array Antenna – Option 360
How to Set Up Phased Array Antenna Settings
How to Set Up Phased Array Antenna Settings
IMPORTANT! See also,
"SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)."
This section reviews the steps in setting up an Option 360 measurement. If you
are not familiar with this process or would like more information, refer to
to Define a Set Up a Scan and Use Option 360"
This section consists of:
—
Figure 14-11 Setting Up Option 360 Using Other Modes
Option 360 Setup Procedure
1. Connect your equipment similar to
2. Set FieldFox to use static IP address:
Keysight N9938-90006 User's Guide
"Alignments" on page
"Option 360 Setup Procedure"
Press System
— Then System Configuration
a. In the Setting screen, use the
or numeric keypad to highlight Obtain IP.
b. Press Edit
204, in NA
Figure 14-1 on page
> More > LAN
>Obtain IP Static
mode,Chapter 9,
"How
419.
arrows, the rotary knob,
427