Keysight FieldFox B Series User Manual page 491

Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307))
How to Set Up Mapping Settings
Figure 16-16 Example of England Displayed Text
Import ZIP file using FieldFox Map Support Tool with Import Maps (ZIP)
3. If not done, connect your equipment similar to
Keysight N9938-90006 User's Guide
e. Else, to import a *zip file (i.e., you can come back and do this later
after the mapping route is defined).
i. Press System 7 >
ii. Then to import map pictures, press
> Import Maps
iii. Press Import Maps (ZIP)
longitude values to view site maps from pictures (KML).
Prototype Phased Array Antenna – Option
Antennas – (Full Capability Requires EMF Option 358, and either SA mode
(Option 233 Mixed Analyzers) or OTA—5G NR / 5G NR EVM Conducted
Option 378)", and to Figure 14-1 on page 419
See also,
— For setting up GPS Option 307, refer to
Settings," and then
— For setting up a phased array antenna, refer to
Rapid Prototype Phased Array Antenna – Option 360."
Utilities > Mapping
> Recall File
Chapter 14, "5G Rapid
360",
Chapter 31, "System
"GNSS (GPS+) and GPS" on page
Map Explorer (Get Maps)
and change latitude and
Chapter 15, "USB
784.
Chapter 14, "5G
491