Keysight FieldFox B Series User Manual page 798

System Settings
Service Diagnostics
System Information
The System information table shows important information about your
FieldFox. The following is the most useful information:
— Model Number – FieldFox model
— Serial Number – Identification number of your FieldFox
— Firmware Release – The currently installed version of software. Check to
— Network Identity – The network name and current IP address of your
— Reflectometer Factory Cal - The Factory (CalReady) Calibration shows the
Event Log
The Event Log shows the information that has appeared on the FieldFox
screen. The most recent information is at the top of the table.
Press
Battery
Learn more in
823
Internal Temperatures
Learn about the importance of the internal FieldFox temperatures in
Temperature Protection" on page 32
798
see if you have the latest firmware at:
www.keysight.com/find/fieldfoxsupport
FieldFox.
date and time that the factory cal was performed for each test port and the
Thru connection. The format is P1 <date time>, P2 <date time>, P1-P2
<date time>. The factory calibration is updated when you send your
FieldFox to Keysight for Instrument Calibration. Learn more in
"Instrument Calibration".
Clear Events to erase this information.
Chapter 34,"Working with the Lithium-Ion Battery", on page
.
.
Keysight N9938-90006 User's Guide
Appendix C:
"FieldFox High