Keysight FieldFox B Series User Manual page 492

Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307))
How to Set Up Mapping Settings
4. Install street maps into the FieldFox. Refer to
5. Using Discrete Colors softkey Menu, set the red (maximum) and blue
492
— For setting up a USB antenna, refer to
(Full Capability Requires EMF Option 358, and either SA mode
(Option 233 Mixed Analyzers) or OTA—5G NR / 5G NR EVM
Conducted Option 378)."
Running the FieldFox Mapping Software" on page
Downloading map options:
— Store the maps *.zip file onto USB or SD card and the FieldFox can
load from USB, SD card, or internal drive (if the maps are saved to
the FieldFox).
— Connect the FieldFox to the LAN with internet access and use the
FieldFox Mapping software to download a maps image *.zip file.
— If necessary, you can download the maps at later time.
(minimum) values. For setting color coded bar scale preferences, refer to
Chapter 31, "System Settings,"
Menu" on page 783.
a. Press System 7 >
b. Optional: Select the Red or Blue Limits to edit by using the
arrows, the rotary knob, or numeric keypad to position the trace for
optimum viewing on the FieldFox display.
Then Edit (the color coded bar scale Red or Blue limits are at the
top of the FieldFox display).
Chapter 15, "USB Antennas –
"How to Install Node.js and
and "Using the Discrete Colors Softkey
Utilities > Mapping >
Keysight N9938-90006 User's Guide
472.
Map Explorer (Get Maps)