Keysight FieldFox B Series User Manual page 62

CAT (Cable and Antenna Test) Mode
2-Port Insertion Loss Measurements
How to make a 2-port Insertion Loss Measurement
— Press Mode then CAT.
— Then
— Press Freq/Dist and enter
— Press Sweep 3, then select a
— Press Cal 5, then perform a calibration. Learn more on
— Connect the DUT and view the insertion loss measurement results.
When measuring very long lengths of cable, it may be necessary to increase
the sweep time. Learn how on
Help at:
https://www.keysight.com/us/en/lib/resources/service-manuals/keysight-fi
eldfox-library-help-and-manuals-2153870.html
Library, Help and Manuals – FieldFox Online Supplemental Help).
62
More then Insertion Loss
measurement.
Calibration" on page 127.
(2-Port).
Start and Stop frequency values of the
Resolution setting.
page 56. Learn how in the Supplemental Online
(via Keysight FieldFox
Keysight N9938-90006 User's Guide
"How to Perform a