Keysight FieldFox B Series User Manual page 832

Safety Considerations
For the FieldFox
For the FieldFox
832
No operator serviceable parts inside except for the lithium-ion
battery. Refer servicing to qualified personnel. To prevent electrical
shock do not remove covers.
If this product is not used as specified, the protection provided by
the equipment could be impaired. This product must be used in a
normal condition (in which all means for protection are intact) when
attached to the AC–DC adapter.
The unit may be used only in the operating conditions and positions
specified by the manufacturer.
Do not install substitute parts or perform any unauthorized
modification to the product. Return the product to Keysight
Technologies or a designated repair center for service to ensure that
safety features are maintained.
Applicable local or national safety regulations and rules for the
prevention of accidents must be observed in all work performed.
Ensure that the connections with information technology equipment
comply with IEC950 I EN60950.
Observe all ratings and markings of the instrument before
connecting the instrument.
Maximum Input Voltages and Power:
RF Output Connector: 50V DC, +23 dBm RF
Ext Trig/Ref Connector: 5.5 V DC
RF Input:
+27 dBm RF, ±50 VDC Max. (N991xA/B, N9925B, N9926A,
N9928A, N993xA/B)
+23 dBm RF, ±50 VDC Max. (N9923A, N9923AN)
+25 dBm RF, ±40 VDC Max. (N995xA/B, N996xA/B)
DC Input: 19VDC, 4ADC
Learn more about Maximum power and voltages in the FieldFox Data Sheet.
Refer to
https://www.keysight.com/us/en/assets/7018-03314/data-sheets/5990-9783.
pdf.
Keysight N9938-90006 User's Guide