5G Rapid Prototype Phased Array Antenna – Option 360
How to Set Up Phased Array Antenna Settings
IMPORTANT! It is not sufficient to be locked to the GNSS satellite, the
frequency reference must be locked to GPS. Refer to
Settings"
Keysight N9938-90006 User's Guide
— Array Antenna: Center frequency, Azimuth Ref, and Elevation
Ref
— Polar Display: Ref
See also
"How to Set Up Phased Array Antenna Settings" on
page
427.
d. Optional: Measure >
—
Record Settings
—
Measure Interval OFF ON
—
Interval Type Time Distance
—
Time Interval
Interval Type = Time) or
—
Distance Interval
Interval Type = Distance)
—
Auto Save OFF ON
—
Back
e.
Record Save/Recall
f.
Record
or
g.
Play
if you have a previously stored data scan
See also
"How to Set Up Phased Array Antenna Settings" on
page 427
and
"Step 6: Enable Data Logging and Playback the
Results" on page
443.
Learn more, refer to
Logging" on page 497
h. Optional: Press Sweep 3 and modify/select items:
—
Single
—
Continuous OFF ON
—
Restart
—
Dwell Time
For pulsed RF measurements, it is recommended
that the Dwell Time is increased to ~100 ms.
Default = 10 ms.
—
Max Hold
For pulsed RF measurements, it is recommended
that Max Hold is set to OFF when using the Heat Map display.
(Default = OFF)
and then to
"How to make GPS settings" on page
Data
Logging:
(Outdoor Mapping only) then choose
if applicable (only active when
if applicable (only active when
to return to previous menu
(Save Log File, Recall or
Chapter 16
Mapping and
to ON (default)
"Setting up Data
Chapter 31, "System
785.
441