Keysight FieldFox B Series User Manual page 651

Channel Scanner (Option 312)
How to Set Up Channel Scanner
Outdoor Mapping Procedure
For Indoor Mapping and more on Outdoor Mapping, see also
Mapping and
"Option 352 Outdoor Maps Setup Procedure" on page
Data Logging" on page
1. Press Measure 1 or Trace 6 >
2. Outdoor Mapping Only: Press
3. Press
4. To begin outdoor logging recording: Press
5.
6. When done press
7. Press
Learn more, refer to
Setup Procedure" on page 489
See also,
Keysight N9938-90006 User's Guide
"Option 352 Indoor Maps Setup Procedure" on page
497. See also,
— Meas Interval OFF ON (default = OFF)
— Interval Type Time Distance (default = Time)
— Time Interval 1 sec to 3,600 seconds or
— Distance Interval
— When done, press
Record Save/Recall
— Recall Log File
— File Folder Default System
— File Type - CSV or KLM
— Auto Save OFF ON
— then Back
Learn more, see "How to Set Up Channel Scanner" on page
If Auto Save is On (default = OFF) Measurements are stored automatically
accorded to the specified time or distance interval values. Refer to step 5.
Optional: Auto Save OFF
recording, the FieldFox stores intermediate results in a temporary file. If
the power fails during recording you can retrieve the results. Select
Log File. Select the temporary file name.
Press Record Save/Recall
Stop
file name where the file results will be stored.
Done
Chapter 16
Chapter 32, "File Management."
Chapter 32, "File Management."
Data Logging
Record Settings
- set to ON
from 1m to 10 km
Back
then:
- (default = Default).
- (default = OFF). Press to enable/disable.
Record
(default)—When Auto Save is on, during
> Auto Save On Off
or Esc. The files save dialog is displayed. Edit the
Mapping and "Option 352 Outdoor Maps
and "Setting up Data Logging" on page
Chapter 16
485,
489, and "Setting up
then:
- choose a setting
639, step b.
Recall
497.
651