Keysight FieldFox B Series User Manual page 778

System Settings
GPS – Distance Settings
File folders
When enabled, FieldFox uses the last selected Device and Folder location as the
default device location after instrument power cycle.
Before setting the preferences for the File Folders, you must select the
Device and Folder locations. Refer to
How to set File Folders
1. Press System 7 >
2. Then scroll to User Folder Persist:
See also:
Alpha Numeric Editing
— Keyboard Style – Toggles through Qwerty/ABC style keyboards that the
File Saving Naming Options
— Prefix – Displays the current choice for Prefix. Choices are User, Last File
— Auto Append – Displays the current choice for Auto Append to a filename
778
— Internal
Connect a GPS antenna to the top-panel GPS connector.
Learn more about additional GPS antenna accessories at
http://www.keysight.com/find/fieldfox. Internal is set
automatically when Frequency Reference Source is set to
GPS. Learn more in
page 789.
Preferences
— User Folder Persist (On/Off) – Defaults to the current Device and
folder location at power up. Toggle User Folder Persist On/Off when
a new Device location is selected location.
— User Folder – displays the default folder location.
— User Device – displays the default device location.
"Alpha Numeric Editing"
Labeler displays. Refer to
(default), or Off. Refer to Prefixes and Suffixes for Filenames in
Suffixes for Filenames" on page
(Suffix). Choices are Off (default), Number, Date. Refer to
Suffixes for Filenames" on page
- Enable GPS using Option 307 – Built-in GPS.
"Frequency Reference Source" on
Chapter 32, "File Management."
Preferences
>
and "File Saving Naming
"How to use the FieldFox labeler " on page
816.
816.
Keysight N9938-90006 User's Guide
Options".
807.
"Prefixes and
"Prefixes and