Keysight FieldFox B Series User Manual page 372

Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5G TF
Option 377, 5G NR / 5G NR EVM Conducted Option 378
How to Set Up Over–the–Air (OTA) Mode Settings
Data Log-Play files are saved to:
14. Export KML file into 3rd party mapping software (i.e., Google Map or
372
— (Press Record to begin a new recording.)
— Then Maps To enable map view and related features (e.g., Data
Selection, Red/Blue Limits, Labels & Icons, Zoom).
— Data Selection
data channel, sort type, and sort order. See also previous
step 8
— Red/Blue Limits
values to the red (high power limits) and blue (low power
limits) heat map display limits (defaults: Red Limit =
–20 dBm, Blue limit = –90 dBm).
— Labels & Icons
map data point labels and icon types.
Labels OFF ON
Icons
Flag Point Line
— Save Image (PNG)
(default filename is "MapImageFile").
If File Folder is set to Default then Data Log-Play files are
—
save-recalled to:
"[CurrentDevice]\RecordPlayback\OTA"
If File Folders are set to System, then Data Log-Play files are
—
save-recalled to:
"CurrentDevice\<UserSelectedFolder>\
Google Earth). Refer to
Party Software (Example: Google Earth with Animation Tool)" on page
Opens a softkey menu to set the active
above.
Opens a softkey menu to assign power
Opens a softkey menu to enable/disable
Enables/Disables map data point labels. When
enabled, a label is displayed for every map data point
(e.g., "Data 1"). When disabled, labels are not
displayed for the map data points.
Sets the type of icon that is used to display a map's
data points (default = Flag).
Saves the current displayed map to a *.png file
"Step 6: Import and Play back KML Files into 3rd
Keysight N9938-90006 User's Guide
392.