Keysight FieldFox B Series User Manual page 483

Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307))
How to Set Up Mapping Settings
How to Set Up Mapping When the FieldFox Is On The LAN
If your FieldFox is connected directly to the LAN, you can view your maps by
using OpenStreetMaps directly (i.e., no need to use the FieldFox Map Support
Tool to download the maps as a *.zip file). But, you will need a valid GPS signal
(Option 307 required). Refer to
Display a Map File
1. Press System 7 >
2. Then choose from the following:
If a "Warning: GPS data invalid - GPS data must be valid to
show current GPS location" is displayed, verify your GPS signal is
connected and working properly.
3. Enter a Zoom by using the RPG or the
4. If you do not see your Map on the FieldFox display:
Keysight N9938-90006 User's Guide
Utilities
— Press Edit
— Enter a Zoom by using the RPG or the
highlight Zoom and then enter a value between 4 and 17.
— Press Go to GPS Location
current GPS location.
— Press Zoom – opens a menu of
— Press Pan – Opens a menu of softkeys to move East, West, North,
and South on the current displayed map area
— Save Image (PNG)
selected, the "Save Map picture file" feature opens to the
current storage location (default = [INTERNAL]:) where you can
name and save your current displayed map area.
and then enter a value between 4 and 17.
— Use the RPG or the
Longitude and then enter a value for latitude and longitude that
corresponds closely to the "Current Area Center" value displayed in
the FieldFox Mapping software.
— Use the Go to GPS Location softkey.
Refer to Figure
Optional: If you want to stop the "Reading map..." process, press Esc to
stop map search.
"Display a Map File" on page
> Mapping > Map Explorer (Get Maps)
– sets the current displayed map to the
Zoom In
– To save the current map as a PNG file. When
arrow keys to highlight Latitude and
16-14.
483.
arrow keys to
and Zoom Out softkeys
arrow keys to highlight Zoom
483