Keysight FieldFox B Series User Manual page 467

Keysight Handheld Analyzers
N99xxB User's Guide
16 Indoor and Outdoor Mapping – Option 352 (Requires Spectrum
Analyzer Mode (Option 233), and GPS Receiver (Option 307))
IMPORTANT!
B Model FieldFoxes measurements require an OML head
https://www.omlinc.com/.
a. Requires external mixer to down convert millimeter wave frequency to intermediate frequency (IF). Recommend
OML Inc. WR-28 26.5 to 40 GHz harmonic mixer, model number M28H2A1DC. Contact OML directly
www.omlinc.com for ordering information.
Option 352 maps signals that were measured using the SA RF Input Port 2
connector.
The FieldFox requires Option 352 for outdoor mapping and GPS (Option 307)
installed. And, one of the following, an Over–the–air (OTA) mode (LTE FDD
Option 370, 5G TF Option 377, or 5G NR / 5G NR EVM Conducted Option 378),
or Channel Scanner mode (Option 312), or Phased Array Antenna (Option 360).
Also, requires browser that supports HTML5 (i.e., web browsers not supported:
IE6, IE7, and IE8).
Recommended, but not required, preamplifier (Option 235) to improve receiver
sensitivity.
Keysight's FieldFox handheld analyzer (with Option 352) combined with a USB
triaxial antenna (p/o EMF Measurements – Option 358) provides a unique,
portable solution for indoor and outdoor mappings in the field. Option 352
adds indoor and outdoor mapping capability to FieldFox analyzers, so that
FieldFox can import maps from OpenStreetMap (OSM) for data collection and
data plotting to the map directly on the FieldFox instrument display. The
FieldFox Map Explorer resides at the System level and enables you to
download, import/export, and view outdoor maps. All of the other data
logging, record/playback, plotting data on indoor/outdoor maps can be
enabled within the following modes:
— Channel Scanner (Option 312)
— Phased Array Antenna Support (Option 360)
— Over-the-Air (OTA) LTE FDD (Option 370)
— Over-the-Air (OTA) LTE TDD (Option 372)
467
a
. Refer to