Interference Analyzer (SA Mode) – Option 236
Record/Playback (SA Option)
How to Playback a Session
— Press Trace 6
— If the session is already open, skip the following step. Otherwise:
— Then
— Then
— Then
PLAY
end of the recording is reached, playback begins again at trace 1 and
continues to loop indefinitely.
During playback, choose from the following:
—
—
Recording Configuration
To change Recording Configuration settings:
Keysight N9938-90006 User's Guide
— Press
Play
to start replaying the recording from the beginning.
— Press
Record
to continue recording.
Record Playback Setup
— Press
Recall Session
Open.
Recorder Player
Play
is displayed in the left of screen graticules during playback. When the
Pause Resume
Temporarily halts playback. Then choose from the
following:
—
Pause Resume
—
Playback State/Tag
tag, or scroll through the state tags. Enter a value between 1 and the
total number of state tags using the numeric keypad,
the rotary knob. Active when playback is paused. Learn more in
About State and User Tags in
page
537.
—
Playback Trace
continue playback from a specific trace, or scroll through traces
manually. Enter a value between 1 and the total number of traces
using the numeric keypad,
Stop
Immediately stops playback. Then choose from the following:
—
Play
Start playback from trace 1.
—
Record
Resume recording from the last recorded trace.
—
Record Playback Setup
Configuration settings or Close the session.
Then select a session to playback and press
Press to continue playing.
Allows you to continue playback from a state
"About State and User Tags" on
Activated automatically when Paused. Allows you to
arrows, or the rotary knob.
Return to the setup menu to change
arrows, or
539