Keysight FieldFox B Series User Manual page 399

Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5G TF
Option 377, 5G NR / 5G NR EVM Conducted Option 378
How to Set Up EMF Mode Settings (Requires EMF (Option 358) and 5G NR (Option
378))
6. Verify EMF in 5G NR Mode:
Figure 13-31 Example Summing of Triaxial Values
Keysight N9938-90006 User's Guide
ii. Press Freq/Dist >
iii. Press Freq Span
iv. Press System >
[Auto] – (default == Auto) then
v. Press X to view the X axis
vi. Press Y to view the Y axis and
vii.Press Z to view the Z axis
a. Press Mode > OTA
b. Press Meas Setup 4 >
(i.e., For this example. Other units are selectable.)
For more information:
— Refer to Figure 13-31 on page
— See also "GNSS (GPS+) and GPS" on page
Center > 3.5 GHz
> 120 GHz then
Utilities > EMF Antennas
> 5G NR then
More > EMF > dBuV/m
399.
then
> Antenna Axis
784.
399