Keysight FieldFox B Series User Manual page 573

Keysight Handheld Analyzers
N99xxB User's Guide
23 Frequency Offset Using Power Sensor (FOPS) – Option
208
FOPS is accessed through (and requires) Option 302 USB Power Meter Mode.
With both options installed, you can send a signal with the FieldFox internal
source at one frequency, and measure this signal with a Keysight U-Series USB
Power Sensor at another frequency.
Figure 23-1 Display for FOPS
In this Chapter
"How to select Power Meter (USB Sensor)" on
page 577
"Measurement Selection" on page 577
"Sweep Type and Frequency" on page 578
"Power Sensor Settling" on page 580
"Sweep Settings" on page 580
573