Keysight FieldFox B Series User Manual page 164

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
SA Mode Settings
Figure 9-3 FieldFox Antenna Editors – Settings and Values
How to use the Antenna/Cable Editor
1. Press Scale/Amptd >
2. Then
3. Press
4. Then use the
164
Before editing the antenna settings, it is important to know whether
you are using a magnetic H-field (dB S/m) or electric E-field (dB /m)
antenna. When you setup the Antenna Factor Correction table, you
will select one of these two units so that the FieldFox knows how to
convert the measurement data to various Field Strength Amplitude
units.
Edit Antenna or
New then Yes
table and reset header information to default settings.
arrows to select a field.
— To edit header information, press
using the FieldFox labeler.
— Description: Enter a description for the antenna or cable
correction table. This is NOT the filename used to save the
file.
— Antenna Factor
measurement Amplitude units will be available or not, and
how to convert between them. Select None (default
setting) if you just want standard Amplitude units, with a
simple dB offset supplied by the correction table. This
makes the correction basically identical to a Cable
More Corrections
>
Edit Cable to open the Antenna / Cable Editor.
to clear all data from the existing Antenna or Cable
Edit
Unit: Determines whether Field Strength
Keysight N9938-90006 User's Guide
then modify the selected field