Keysight FieldFox B Series User Manual page 781

System Settings
GPS – Distance Settings
3. Then
CAT/NA
Choose the CAT/NA settings for SnP file save, default factory error corrections,
extended cal default. See also
included in saved SNP Data:" on page
How to select CAT/NA defaults:
1. Press System 7 >
2. Then use arrow softkeys or the knob to select CAT/NA
3. Then Edit for each of the following:
4. Then
SA
Choose the SA setting for Individual measurement Control default. See also
"Alignments" on page
How to select SA defaults:
1. Press System 7 >
2. Then use arrow softkeys or the knob to select SA
3. Then
Keysight N9938-90006 User's Guide
— Inches
— TDR Sweep:
— Cable (default and the most accurate)
— Auto
Done Edit (after each change in setting)
Preferences
— SnP File Save
— Default
— Advanced
— Default Factory Error Corr. (N995xB/6xB Only)
— Enhanced Response
— Full 2 Port
— Extended Cal Default (N995xB/6xB Only)
— On
— Off (default on models >6 GHz)
Done Edit (after each change in setting)
204.
Preferences
Edit for each of the following:
— Individual measurement Control
"> What Data Processing functions are
813.
Preferences
>
Preferences
>
781