Keysight FieldFox B Series User Manual page 436

5G Rapid Prototype Phased Array Antenna – Option 360
How to Set Up Phased Array Antenna Settings
16. Optional: Modify scale and amplitude values:
17. Optional: Modify the averaging and Integrated BW settings:
436
Then choose:
— Save to set the attenuator power (default: –10 dB). Set to 0 dB.
— Recall change to ON.
— Device to set the absolute power (dBm)
— File Type then choose:
— State Saves the current state settings
— Trace+State
— Picture (PNG)
— Data (CSV)
Learn more, refer to
Press Scale/Amptd
Then one of the following:
— Autoscale Automatically adjusts the Y-axis minimum and maximum
values.
— Scale Manually enter a scale per division values.
— Others: Scale, Ref
Learn more, refer to Chapter 30, "Data Analysis Features."
Press BW
Then one of the following:
— Average Enable OFF ON
— Average Count
— Integ BW
Learn more, refer to Chapter 30, "Data Analysis Features"
"SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)."
Saves the current Trace+State information
to save the current displayed trace as a PNG
save files as a CSV file
Chapter 32, "File Management."
Level, etcetera as desired.
Keysight N9938-90006 User's Guide
and Chapter 9,