Keysight FieldFox B Series User Manual page 446

5G Rapid Prototype Phased Array Antenna – Option 360
How to Set Up Phased Array Antenna Settings
4. When done press Stop. The log file is automatically saved to the defined
Learn more about file settings, refer to the
5. Press
Playing a Data Log and Viewing the Data
To play the log results:
1. Press
2. Press
3. Press
To pause the log play:
446
— Data Selection
data channel, sort type, and sort order. See also previous
steps 10
Settings" on page
— Red/Blue Limits
values to the red (high power limits) and blue (low power
limits) heat map display limits (defaults: Red Limit =
–20 dBm, Blue limit = –90 dBm).
— Labels & Icons
map data point labels and icon types.
Labels OFF ON
Icons
Flag Point Line
— Save Image (PNG)
*.png file (default filename is "MapImageFile").
Device Type and File Type.
Else, edit the User Folder and File Type, under
the file results will be stored.
Back
Record Save/Recall
And, use the Use the RPG or the
played.
Recall File > Back
Stop to exit the log playing.
Opens a softkey menu to set the active
in "How to Set Up Phased Array Antenna
427.
Opens a softkey menu to assign power
Opens a softkey menu to enable/disable
Enables/Disables map data point labels. When enabled,
a label is displayed for every map data point (e.g., "Data
1"). When disabled, labels are not displayed for the map
data points.
Sets the type of icon that is used to display a map's data
points (default = Flag).
Saves the current displayed map to a
Chapter 32, "File
> Recall Log File
arrow keys to highlight the file to be
> Play
Keysight N9938-90006 User's Guide
Record Save/Recall where
Management".