Keysight FieldFox B Series User Manual page 773

System Settings
Preferences
2. Then use arrow softkeys (
3. Then
4. Then
How to select a Language
1. Press System 7 >
2. Then choose from the following:
Battery Saver
When the battery saver is OFF, the RF source power is left ON at the end of the
sweep which consumes more battery power. This feature is used in CAT, NA,
VVM modes, and SA mode when the internal source is turned ON.
Battery Saver is the ONLY FieldFox setting that must be made as a Preference
from the Quick Settings table. This setting remains until you change it again.
The FieldFox internal temps will run 2°C – 5°C cooler with the Battery
Saver on (the temperature range is dependent on the ambient temp).
Keysight N9938-90006 User's Guide
Edit for each of the following:
— Language (see)
— Batter Save Mode (see)
— On
— Off (default)
— Startup Mode (see)
Done Edit (for each change in setting)
Preferences
This setting is available under Global Settings by:
Press System 7 > Preferences
— English
— Espanol – Spanish
— Deutsch – German
— Italiano – Italian
— Francais – French
— Russian
— Japanese
— Chinese
— Turkish
) or the knob to select Global Settings
Language OR
>
Preferences
>
773