Keysight FieldFox B Series User Manual page 745

4. Remove the SD card or USB storage device from your PC.
5. Install the SD card or USB storage device into the FieldFox.
6. Set the device type (SD Card or USB storage device) by referring to
Device" on page 810.
7. Recall the limit line *.csv to the FieldFox.
8. Look for the following messages:
— When successful, the FieldFox displays a message similar to this:
"Recalled [USBDISK]:\LimitLineExample.csv".
— If unsuccessful, the FieldFox displays a message similar to this:
"212, Operation failed. Possible file content error."
For an example trace with limit lines, refer to
Table 30-1 Example: Limit Line Formatting (*.csv) (Sheet 1 of 2)
Description of Limit Line
#Comments start with "#"
Description
Enabled
Fixed/Relative
Lower/Upper
LimitLines
Frequency
5000000000
10000000000
20000000000
30000000000
#Comment 2 (Example)
Keysight N9938-90006 User's Guide
Data Analysis Features
All about Limit Lines
Figure 30-9 on page
LimitExample
TRUE
Fixed
Upper
Amplitude
–70
–70
–80
–80
"Set File Type and Select
748.
Notes
Any cells that begin with # are
ignored by the FieldFox.
Example "LimitExample" name
only. Use any descriptive name.
Choose: TRUE or FALSE
Choose: Fixed or Relative
Choose: Lower or Upper
Must literally read: "LimitLines".
This indicates the limit line's
definitions begins below.
These must be written literally as
"Frequency" and "Amplitude".
Any cells that begin with # are
ignored by the FieldFox.
745