Keysight FieldFox B Series User Manual page 65

DTF (Distance to Fault) Measurements
How to make DTF Measurements
9. Either press
10. Connect the start end of the DUT to the FieldFox.
11. Press Meas Setup 4 then
Keysight N9938-90006 User's Guide
Edit/Save/Recall Cables
the Velocity Factor/Cable Loss of the DUT using the
Cable Loss keys.
setting is False, then you may see Alias faults on the screen. Learn more
on page 73.
then Recall
Settings then Next Page. If the Alias-free Range
Cable, or directly enter
Velocity Factor and
65