Keysight FieldFox B Series User Manual page 783

System Settings
Discrete Colors Softkey Menu
Discrete Colors Softkey Menu
The discrete colors softkey menu can be used to increase the choice of colors
displayed from two to up to six colors, for easier measurement readings. Refer
to
Figure 31-7 Display Example: Color Coded Bar Scale (x6 Colors)
Using the Discrete Colors Softkey Menu
1. Press System 7 >
2. Choose from the following:
System Configuration
Options (Licensing)
You can view and install options on your FieldFox. To see a comprehensive list
of the options that are available, view the FieldFox Configuration Guide at:
https://www.keysight.com/us/en/assets/7018-06515/configuration-guides/
5992-3701.pdf.
How to view the Installed Options
1. Press System 7 >
2. Then
The currently installed options are listed.
How to Install Options (License File)
A license file (*.lic file) must already be on a USB Flash Drive. To learn how to
obtain a. license file (*lic file), visit:
https://www.keysight.com/us/en/lib/resources/service-manuals/keysight-fi
eldfox-library-help-and-manuals-2153870.html.
Keysight N9938-90006 User's Guide
Figure 31-7.
Preferences
— Discrete Colors ON OFF
greater than 2.
— Number of Colors
(default) = 2, red and blue).
— High Power Red Blue
indicate the highest power levels (default = Red).
System Configuration
Show Options
Discrete Colors
>
– to enable/disable the discrete colors
– choose up to 6 discrete colors (Minimum
– choose red or blue to choose the color to
Options (Licensing)
>
783