Using Emi Measurements (Option 361) - Keysight FieldFox B Series User Manual

Electromagnetic Interference (EMI) Measurements – Option 361

Using EMI Measurements (Option 361)

Using EMI Measurements (Option 361)
EMI enables you to do the following:
Measure and display emission signals to verify your device/instrument's pre-compliance
performance
Electromagnetic Interference Features (EMI) – (Option 361)
— Amplitude Probability Distribution (APD)
— Selectable CISPR bands (A, B, C, D,
— Fast SA Scan for quick setup check
— Frequency range coupled to CISPR bands
— Logarithmic frequency axis
— 200 Hz, 9 kHz, 120 kHz 6 dB resolution
Keysight N9938-90006 User's Guide
Statistics, both CCDF and Histogram
E)
bandwidths, and 1 MHz impulse
bandwidth, auto–coupled to CISPR bands
— EMI Detector settings, selectable per
trace
— Quasi-Peak
— EMI Average
— Positive Peak
— Simple Color coded Trace/Detector
pair controls
321